• Design and simulation of a sewer blockage detection system : 

  Wanada, Sam (Busitema University, 2016-05)

  Sewer blockages in waste-water sewer systems is a serious problem for many cities and a challenge to the organizations responsible for sewer systems. Most sewer systems, a large percentage of the waste-water is lost in ...
• Design and simulation of roadside rainwater harvesting system : 

  Ocen, Innocent (Busitema University, 2018-06)

  The Uganda water supply strategy highlights rain water harvesting from various. surface conditions as a main source water supply and for small scale irrigation development at farmer's level. While ponds, dams, and In-situ ...
• Prediction of yarn breakage on ring frame by failure mode and effect analysis using fuzzy logic 

  Luba, Lawrence (Busitema University, 2018-05)

  In a textile mill, spinning is one of the most important processes in the production line which is the heart of the production. Ring spinning is the most widely used spinning technology today because it is universally ...
• Design and construction of a coffee roaster machine 

  Gumisiriza, Jane (Busitema University, 2018-05)

  Coffee roasting is one of the. most important stages in processing drinking coffee to enhance flavours, and ease grinding. It is a process of pyrolysis (time temperature dependent) which, by increasing the temperature of ...
• Design and construction of a manually operated Sukuma wiki Slicing Machine 

  Malinga, Tadeo Jude (Busitema University, 2015-05)

  Sukuma wiki slicing is done mainly by women using a hand knife which is tedious, labor intensive and time consuming especially for bulk production. Their different of manual slicers on market but most of them are for home ...
• Design and simulation of an appropriate slaughterhouse wastewater treatment and recycling system for sanitary uses : 

  Kutesa, Scovia (Busitema University, 2018-06)

  The abattoir (meat processing industry) is one of the Largest consumers of total freshwater used in the agricultural and livestock industry worldwide. Abattoir produce large amounts of slaughterhouse wastewater (SWW) because ...
• Characterization of pineapple leaf fiber for a reinforced bio-composite. 

  Osinde, Job (Busitema University, 2013-05)

  Green materials and composites is a movement that has been gained the global attention over the past few years. Recently, green. materials are planned to be environmentally responsible, economically viable, and healthy ...
• Blood bank mobile application for interaction between blood banks and blood fusion centers. 

  Ocen, Thaddeus; Nkugwa, John Mark; Ogwang, Ashraf (Busitema University, 2022-03)

  Blood is an indispensable element of human life and there are no replacements' for it World Health Organization (WHO) proposes countries to focus on young people to achieve 100%'·non-remunerated voluntary blood donation ...
• Automated mobile and web-based applications for vehicle history report generation. 

  Namusoke, Hawah (Busitema University, 2018-06)

  The transport industry is one of the most profitable sectors in the business world. People always spent money for being transported, arid so will they in the future. Transportation is important as it brings people together ...
• Design of coiler mechanism for the carding machine in the textile laboratory of Busitema university. 

  Nakiyingi, Mourene (Busitema University, 2013-05)

  During fabric production, subsequent processes namely; spinning, weaving or knitting, wet processing and garmenting are followed, spinning process has the blow, carding, draw frame, combing (optional), speed frame and ...
• Manufacture of a barkcloth reinforced biocomposite. 

  Lugya, George William (Busitema University, 2013-05)

  In the latest years industry is attempting to decrease the dependence on petroleum based fuels and products due to the increased environmental consciousness. This is leading to the need to investigate environmentally ...
• Design of a tailings impoundment dam for artisanal and small scale miners : 

  Kobusingye, Debrah (Busitema University, 2018-05)

  Mineral processing involves the-separation of valuable minerals from gangue minerals through crushing, grinding and concentration. During gravity concentration huge amounts of tailings are discharged to the environment ...
• Air pollution monitoring and alert system. 

  Katusabe, Godfrey (Busitema University, 2016-05)

  This report is about the, chronological order and the nomenclature which was followed when designing the Air Pollution Monitoring and alert system. The whole process Involved identification of the topic to be-discussed ...
• The suitability of Ugandan Musa sapientum banana plant species for textile fibre production. 

  Kashemere, Damari (Busitema University, 2013-05)

  Banana stem has no use after harvesting the fruit; there is a huge generation of waste as a consequence of the plant life-cycle, because pseudostems, hangers and leaves are not economically used. Therefore, this study was ...
• Extraction of peace silk fibers using an eco-friendly method. 

  Kabagenyi, Stella (Busitema University, 2013-05)

  Silk originating from the spittle of an insect is a natural fibrous protein substance. There are two major methods of extracting silk fiber i.e., filament extraction method and the staple (peace) silk extraction method. ...
• Study of the mechanical properties of sansevieria fiber reinforced bio-composite 

  Habbi, Geofrey (Busitema University, 2013-05)

  Many can dispute the tremendous values of Sansevieria plant which is one of nature's greatest treasures. Sansevieria fibres are long filament category and as such, the fibre is spun on a long-fibre spinning system. The ...
• Design and construction of an improved groundnut sheller. 

  Wafula, Simon Peter (Busitema University., 2016-05)

  In Uganda, traditional methods are used for shelling groundnuts. These include, beating with sticks on a flat surface and the use of hands. These are all laborious. There are many mechanical shellers on the market that ...
• Assessing the reliability of water distribution system of NWSC-Nagongera branch Tororo area. 

  Ologe, Hector Daniel (Busitema University., 2019-06)

  The provision of adequate and reliable water supply in developing countries is becoming a challenge for most water utilities especially national water and sewerage corporation. The existence of an information gap regarding ...
• Web based power unit usage monitoring and control system for residential house. 

  Nyafwono, Dorothy (Busitema University., 2018-05)

  In Uganda, most of the power used in a residential house is consumed through sockets. Monitoring of power in these houses is currently done by use of YAKA meters which only views the total amount of power consumed. Other ...
• Automatic driver license verification and road access system. 

  Tumuramye, Doreen (Busitema University., 2018-05)

  Documents of many types are susceptible to tampering, alteration and counterfeiting, hence those of great importance require verification. Among these are national identity cards, voter’s cards, ATM cards, driver license ...

View more