Busitema University IR Home
→
Faculty of Engineering and Technology
→
Department of Textile and Ginning Engineering
→
Browsing Department of Textile and Ginning Engineering by Issue Date

Browsing Department of Textile and Ginning Engineering by Issue Date

Now showing items 21-40 of 121

Prediction of single jersey plain cotton knitted fabric width using ANFIS.

Niwagaba, Ronald (Busitema University., 2014-05)

Knitted fabric structures have considerable advantages. over woven Fabric structure normally high elasticity, flexibility, easy-care property, better air permeability etc. There is however a number of problems with single ...
Textile assemblies for transdermal delivery of plumeria obtusa extract for medical application.

Ongwen, Dickens (Busitema University., 2014-05)

As science and technology has developed the manner by which drugs can be delivered has grown. Medicines may be taken orally, applied as topical pastes, creams or patches or administered by direct injection to the body ...
Reduction of fabric shade variation using failure mode and effect analysis in dyeing process.

Okwera, Geoffrey (Busitema University., 2014-05)

There are many problems of shade variation in the piece dyed fabrics in the textile industry and this is caused by various factors such as man, machines, methods and materials These factors include steam pressure variation; ...
Predicting the breaking strength of a rotor spun yarn using ANFIS.

Miyingo, Steven (Busitema University., 2014-05)

This project was carried out in partial fulfilment of the requirements for the award of bachelor of science in textile engineering. In this project ANFIS was used to predict the breaking strength of a cotton rotor spun ...
Development of corn-based biomass composite board.

Jingo, Willington (Busitema University., 2014-06)

As the result of greater environmental awareness, the demand for environmentally friendly materials is significantly raised. Therefore, the interest in composites based on renewable-resources has grown (Mohanty et al, 2000 ...
Multi response optimization of yarn strength, imperfections and yarn evenness for rotor spun yarn.

Nantumbwe, Dorothy (Busitema University., 2015-04)

In this study, a multiple response optimization model based on response surface methodology was developed to determine the best rotor speed and yarn twist level for optimum rotor yam strength and unevenness and imperfections. ...
Design and construction of a hand screen printing table with a drying unit.

Sseguya, Dunstan (Busitema University., 2015-05)

This report contains the general procedures carried out while designing and constructing a hand screen printing table with a drying unit as a project carried out at Busitema University by Sseguya Dunstan for partial ...
Predicting fabric weight per unit area of knitted structure using fuzzy logic systems.

Abaho, Vicent (Busitema University., 2015-05)

The main purpose of this study is to develop a fuzzy model for the prediction of fabric GSM of cotton knitted fabrics as a function of yarn count and knitting stitch length. The most significant key factors yarn count and ...
Wet blue leather grading using fuzzy expert system.

Otim, Michael (Busitema University., 2015-05)

Wet blue hides defect extraction and classification has remained as the centre of research for the leather tanning industry although the investigation in this domain was first reported around one century ago. Several ...
The study of antimicrobial property of cotton fabric dyed with extracts from selected indigenous plants.

Odongo, James (2015-05)

Clothing textiles are in permanent contact with microorganisms, which can cause serious problems, including fabric rotting, staining; unpleasant odours and health concerns ranging from simple discomfort to physical irritation, ...
Water absorbency of wheat straw paper treated with gelatin & carboxymethyl cellulose.

Namubiru, Shamim (Busitema University., 2015-05)

Chapter I consists of; the introduction which includes a background on how water absorbency affects paper properties, brief information about wheat straw, gelatin and carboxymethyl cellulose; the problem statement, ...
Production of handmade paper from rice straw using eco-friendly methods.

Nalubega, Shamim (Busitema University., 2015-05)

Environmentally beneficial paper can be made by replacing wood Fibres with various types of cellulosic fibres Such as straw fibres using eco-friendly methods. Rice straw fibres. are good candidates since they are abundantly ...
Modeling rotor spun yarn strength using polynomial neural networks.

Mwesigye, Barnabas (Busitema University., 2015-05)

This report shows details of the steps which were taken, for execution, findings, and recommendations the project "modeling rotor spun yarn strength using polynomial neural networks". Polynomial Neural Networks (PPN) ...
The study of the effect of moisture regain on yarn breakages during knitting.

Isabirye, Denis (Busitema University., 2015-05)

Yarn conditioning is very important in textile processing since the amount moisture in textile fibres affects the physical and mechanical properties of fibres and yarns. This eventually affects the knitability and weaveability ...
Automatic recognition of woven fabric structures using digital image processing and artificial neural networks.

Nalunkuma, Nulu (Busitema University., 2015-06)

The current method to recognize structures in textile mills in Uganda like Southern Range Nyanza limited involves the use of magnifying glasses and sometimes pulling of single yarns from the woven fabric. This method is ...
Prediction of yarn composition using probabilistic type of artificial neural network.

Jabwana, David (Busitema University., 2015-06)

The main objective of the was to predict yarn composition by probabilistic neural network. Yarns are produced by a series of processes which include blow room, carding, draw frame, comber for combed yarns, speed frame for ...
Design and construction of a manual washing machine.

Ogwok, Solomon (Busitema University., 2015-07)

This project comprises of five chapters; Chapter one presents background of washing and its definition. The problem considered in this study is presented in the problem statement and the justification, objectives and scope ...
Design and construction of a manually operated mulberry leaf chopping machine.

Tumusiime, Godias (Busitema University., 2016)

This report deals the development and testing of a manually operated mulberry leaf chopping machine. The existing methods of cutting mulberry leaves like using a knife, a motorized power chopper and motorized leaf cutter ...
Production of briquettes from peelings of different species of banana.

Namatovu, Debora Patience (Busitema University., 2016)

Biomass particularly agricultural wastes, has become one of the most promising energy sources for developing countries. In East Africa, where biomass dominates the domestic energy market, briquetting technology is gaining ...
Analysis of the surface roughness of weft knitted fabrics using image processing.

Aurien, Pauline (Busitema University., 2016-05)

The main objective of the study was to design an off-line system that analyses the surface roughness of weft knitted fabric using Image processing. The results showed a good correlation between fabric roughness values ...

Browsing Department of Textile and Ginning Engineering by Issue Date

Browsing Department of Textile and Ginning Engineering by Issue Date

Search BUOADIR

Browse

All of BUOADIR

This Collection

My Account